What is dado in construction and interior design?
A dado is the finish on the lower part of a wall up to a stated height: glazed tiles in a bathroom or kitchen, stone cladding on a stair wall, or wooden panelling in a room. It protects the wall where it gets wet or knocked. A BOQ measures dado as an area, in square metres or sq ft.
Key facts
- Also called
- Dado tiling, wall tiling or wall cladding up to dado height
- BOQ unit
- Sq m or sq ft of wall face, with the height stated
- Where it appears
- Bathrooms, kitchens, utility areas, stair walls and finish schedules
- Measurement rule
- IS 1200 Part 11: dado in sq m; voids up to 0.2 m² are not deducted
How do you measure dado tiles?
Multiply the length of each tiled wall by the dado height, then deduct doors and other openings larger than 0.2 m². IS 1200 Part 11 measures dado in square metres.
Worked example. A 2.4 m × 1.5 m bathroom tiled to an assumed 2.1 m, with one 0.75 m × 2.1 m door and a 0.4 m × 0.3 m exhaust opening:
| Step | Working | Result |
|---|---|---|
| Wall length | 2 × (2.4 + 1.5) | 7.8 m |
| Gross dado | 7.8 × 2.1 | 16.38 m² |
| Less door | 0.75 × 2.1 = 1.575 m² | 16.38 − 1.575 = 14.805 m², say 14.81 m² |
| Exhaust opening | 0.4 × 0.3 = 0.12 m², under 0.2 m² | Not deducted |
| In sq ft | 14.805 × 10.7639 | 159.36 sq ft |
A kitchen band of an assumed 0.6 m above a 3.6 m counter adds 3.6 × 0.6 = 2.16 m², or 23.25 sq ft. This is the measured quantity. A tile order adds cutting wastage and rounds up to whole boxes, which the tile calculator works out.
Dado in construction vs in interior design
On a building site, dado usually means wall tiles or stone fixed in mortar or adhesive in wet areas. In interior design it can also mean panelling, wallpaper or a different paint on the lower wall, often topped by a dado rail.
The civil version goes in the tiling or flooring package. CPWD DSR 2023 item 11.46.2, for example, covers vitrified tiles "in skirting, risers or dado" and is billed per sq m; item 11.27 does the same for Kota stone. The interior version goes in the carpentry or painting quote, measured by the area of panelled face, and a dado rail is a separate running-length item.
In joinery, "dado" also names a groove cut across a board to hold a shelf. That meaning does not appear in a finishes BOQ.
Dado vs skirting: what is the difference?
Skirting is a narrow strip at the base of a wall, measured in running metres with its height stated. Dado covers a larger height of wall and is measured as an area.
IS 1200 Part 11 (clause 4.12) states both rules: dados in square metres, skirting in running metres stating the height. Where a wall gets dado down to the floor, leave that wall out of the skirting length so the bottom strip is not paid twice.
What height is a dado?
There is no single standard height. The drawing or finish schedule states it for each room, for example full height in a shower area or a band above a kitchen counter.
The height drives the quantity, so a rate per sq ft means little until the height is fixed. When you compare quotes, check that each one uses the same height in each room. The 2.1 m and 0.6 m heights in the example above are assumptions, not recommendations.
How is dado written in a BOQ?
As its own item, separate from floor tiling, with the tile type and size, bedding or adhesive, joint finish, location and height stated, measured in sq m.
IS 1200 Part 11 (clause 4.1) lists what a tile item must describe: the kind of tile, its thickness and size, surface finish, bedding or fixing method, grouting or pointing of joints, the base it goes on, and whether it is flooring or dado. Where bedding or backing is a separate item, it is measured separately for dados (clause 6.6).
A typical line reads: "Ceramic wall tiles 300 × 450 mm in dado, fixed on adhesive over plastered wall, joints grouted with matching cementitious grout, bathrooms, up to 2.1 m height: 14.81 m²." Our interior BOQ format and tiling cost guide keep dado as its own line.
Common mistakes with dado quantities
The usual ones are working dado out from floor area, forgetting to deduct doors, deducting small openings the rule ignores, and paying for skirting under the dado.
- Floor area as a shortcut. Dado comes from wall lengths and heights, not from floor area.
- Doors left in. Deduct openings over 0.2 m².
- Tiny voids taken out. Openings up to 0.2 m² stay in the quantity.
- Skirting under dado. Pay the bottom strip once.
- Wastage in the BOQ. Keep cutting wastage in the purchase quantity, not in the measured dado.
Go deeper
- Tiling cost per sq ft, including bathroom dado
- Tile calculator for floors, skirting and dado
- Interior work BOQ from your drawings
- Interior BOQ format in Excel
Related terms
Sources
- IS 1200 Part 11:1977, paving, floor finishes, dado and skirting, clauses 3.5, 4.1, 4.3, 4.12 and 6.6 (BIS)
- SiteSetu: tiling cost guide (dado, adhesive and grout lines; CPWD DSR 2023 item 11.46.2)
- SiteSetu: flooring cost guide (DSR 2023 item 11.27 and skirting measurement)
- SiteSetu: interior BOQ format (running length units for kitchens, wardrobes and skirting)
Checked 2026-11-03. Contract documents, tender conditions and the structural drawings for your project take precedence over the general rules on this page.