What is grouting in construction and interior design?
Grouting is filling a gap or void with a fluid mix that hardens. In interiors, tile grout fills the joints between tiles. In construction, cement or non-shrink grout fills the gap under steel base plates and around bolts, and injected grout seals cracks or voids. A BOQ measures each kind differently.
Key facts
- Tile grout
- Cementitious or epoxy; described inside the tile item
- Structural grout
- Under base plates in sq m; bolt pockets by number (IS 1200 Part 2)
- Injection grouting
- By crack length in running metres or by number of ports
- Measurement rules
- IS 1200 Part 2, clauses 4.6.5 to 4.6.7; IS 1200 Part 11, clause 4.1
What is tile grouting?
Tile grout is the cementitious or epoxy filler pressed into the joints between tiles after they are fixed. It closes the joints and gives the tiled surface its finished look.
Specify the grout type, colour, joint width and depth, and how it is applied. Consumption depends on joint size and the maker's figures, so there is no universal kg per sq ft. Our tiling cost guide prices ordinary cementitious grout inside the tiling rate and puts epoxy grout on its own line. The tile calculator estimates grout from the joint width and depth you enter.
What is grouting in construction?
In structural work, grout fills the gap between a steel base plate or precast column and its concrete base, the pockets around holding-down bolts, prestressing ducts, and voids or cracks in concrete and rock.
IS 1200 Part 2 sets out how each is measured:
| Work | IS 1200 Part 2 clause | Unit |
|---|---|---|
| Grouting under stanchion base plates, precast columns or steel grillages | 4.6.6 | Sq m, mix stated |
| Grouting in holding-down bolts | 4.6.7 | Number, with hole size and mix |
| Forming and grouting prestressing ducts | 4.4.2 | Running metres |
| Grout holes for pack or pressure grouting | 4.6.5.1 | Running metres |
| Pressure grouting itself | 4.6.5.4 | By weight of cement forced into the holes |
Remedial injection grouting of leaking cracks is priced per running metre of crack or per port, as our waterproofing cost guide explains. It is not an area coating.
How is grouting measured in a BOQ?
It depends on the kind. Tile grout sits inside the tile item measured in sq m; base-plate grout is in sq m; bolt pockets are counted; pressure and injection grouting go by hole length, cement weight, crack length or ports.
Worked example. A shed has 12 steel columns on 450 × 450 mm base plates:
| Item | Working | Quantity |
|---|---|---|
| Grouting under base plates | 12 × 0.45 × 0.45 | 2.43 m², mix stated |
| Holding-down bolt pockets, 4 per column | 12 × 4 | 48 numbers |
The four bolts per column are an assumption; count them from the drawing. For tiles, IS 1200 Part 11 (clause 4.1) puts the grouting or pointing of joints in the description of the tile item, so the dado example's 14.81 m² already carries its grout.
Grout vs tile adhesive: what is the difference?
Adhesive fixes the tile to the wall or floor; grout fills the joints between tiles afterwards. They are different materials, so a quote should list both.
In our tiling build-up, adhesive is priced from the product's consumption and bag price, and grout from joint geometry and the maker's consumption. Tile adhesive does not replace waterproofing in wet areas; that is a separate item.
Common mistakes with grouting in a BOQ
The usual ones are adding a grout line when the tile item already includes joint finishing, leaving epoxy grout unpriced, not stating the base-plate grout mix, and pricing crack injection by area.
- Paid twice. Check the tile item before adding grout.
- Epoxy assumed. Epoxy grout is a different material; price it on its own line.
- No mix. IS 1200 asks for the mix to be stated for base-plate grouting.
- Wrong unit. Injection grouting goes by length or ports, not sq ft.
Go deeper
- Tiling cost: adhesive, grout and labour
- Tile calculator with grout allowance
- Waterproofing cost, including injection grouting
- Interior work BOQ from your drawings
- Interior BOQ format in Excel
Related terms
Sources
- IS 1200 Part 2:1974 with Amendment 2 (1984), concrete works, clauses 2.4.3, 4.2.1, 4.2.3, 4.2.3.1 and 4.6.5 to 4.6.7 (BIS)
- IS 1200 Part 11:1977, paving, floor finishes, dado and skirting, clauses 3.5, 4.1, 4.3, 4.12 and 6.6 (BIS)
- SiteSetu: tiling cost guide (dado, adhesive and grout lines; CPWD DSR 2023 item 11.46.2)
- SiteSetu: waterproofing cost guide (injection grouting by crack length or ports)
Checked 2026-11-03. Contract documents, tender conditions and the structural drawings for your project take precedence over the general rules on this page.