Skip to main content
Built-up Area: Built-up Area (BUA)

What is built-up area in construction?

Built-up area is the covered floor area of a building or flat, measured to the outer face of the walls, so it includes the wall thickness. Builders use it for construction cost per sq ft, and some sale documents quote it alongside carpet area. What it includes, such as balconies, varies by agreement and local bylaw.

Key facts

Unit
Square feet or square metres; 1 m² = 10.7639 sq ft
Measured
Floor by floor, to the outer face of the walls
Where it appears
Construction estimates, contractor quotes, sale agreements
Governing definition
No single national one; IS 3861 calls the covered area at floor level plinth area

How do you calculate built-up area?

Measure each floor to the outer face of its walls, add any covered areas the agreement includes, such as balconies, and add the floors together.

Worked example for a flat:

PartArea
Carpet area, internal partition walls included70.00 m²
External walls6.50 m²
Built-up area without the balcony76.50 m²
Exclusive balcony, if the agreement counts it5.00 m²
Built-up area with the balcony81.50 m²

70.00 m² is 753.47 sq ft; 81.50 m² is 877.26 sq ft. For a house, measure each floor separately: a G+1 house with 1,000 sq ft on each floor has 2,000 sq ft of built-up area, not 1,000.

Built-up area vs carpet area vs super built-up area

Carpet area is the usable floor inside the walls; built-up area adds the walls and often balconies; super built-up area adds a share of common areas such as lobbies and stairs.

RERA (Section 2(k)) defines carpet area as the net usable floor area of an apartment, including internal partition walls and excluding external walls, service shafts, exclusive balconies or verandahs and exclusive open terraces. Apartments are sold on that figure. Built-up and super built-up area have no single statutory definition, so ask the builder for the area statement instead of applying a percentage. Our square feet calculator handles the unit conversions.

Is built-up area the same as plinth area?

Often, yes. IS 3861 defines plinth area as the built-up covered area measured at floor level, so a contractor's built-up area and an estimator's plinth area usually describe the same measurement.

The difference is in the details. IS 3861 gives exact rules for balconies, verandahs, shafts and projections, while a quote or agreement may use its own. Read plinth area for the IS 3861 rules with a worked example.

Why does built-up area matter for construction cost?

Contractors and cost calculators quote house construction per sq ft of built-up area, so the area you give decides the budget.

Use the built-up area of every floor, not the plot area: setbacks reduce what you can build on a plot. The house construction cost calculator takes built-up area per floor, and the Construction Cost Index tracks how the cost of the same house moves from month to month.

A per sq ft figure is still a planning number. Finishes such as skirting and joinery measured in running feet are priced from their own quantities, not from built-up area.

Go deeper

Related terms

Sources

Checked 2026-11-03. Contract documents, tender conditions and the structural drawings for your project take precedence over the general rules on this page.

All construction terms in the glossary