What is carpet area in construction?
Carpet area is the net usable floor area of an apartment. Under Section 2(k) of the RERA Act, 2016, it excludes the external walls, service shafts, exclusive balconies or verandahs and exclusive open terraces, but includes the area under the internal partition walls. Apartments are sold on this figure.
Key facts
- Definition
- RERA Act, 2016, Section 2(k), for apartments in registered projects
- Unit
- Square metres or square feet; 1 m² = 10.7639 sq ft
- Includes
- Rooms, kitchen, toilets, passages and the internal partition walls
- Other definitions
- IS 3861, local bylaws and pre-RERA agreements may define it differently
How do you calculate carpet area?
Add the floor areas of all rooms measured wall to wall inside the flat, add the area under the internal partition walls, and leave out the external walls, shafts, exclusive balconies and exclusive terraces.
Worked example for a flat, using internal room dimensions:
| Space | Working | Area |
|---|---|---|
| Living | 4.20 × 3.60 | 15.12 m² |
| Bedroom 1 | 3.60 × 3.30 | 11.88 m² |
| Bedroom 2 | 3.30 × 3.00 | 9.90 m² |
| Kitchen | 2.70 × 2.40 | 6.48 m² |
| Toilet 1 | 2.40 × 1.50 | 3.60 m² |
| Toilet 2 | 2.10 × 1.50 | 3.15 m² |
| Passage | 3.00 × 1.00 | 3.00 m² |
| Internal partition walls, 14.00 m of 115 mm | 14.00 × 0.115 | 1.61 m² |
| Carpet area | 54.74 m² |
54.74 m² × 10.7639 = 589.22 sq ft. An exclusive balcony of 3.00 m × 1.20 m = 3.60 m² is left out of the carpet area and shown separately. The square feet calculator handles the unit conversions.
What is included and excluded in RERA carpet area?
Included: the net usable floor area and the internal partition walls. Excluded: external walls, areas under service shafts, exclusive balcony or verandah area, and exclusive open terrace area.
| Part of the flat | In RERA carpet area? |
|---|---|
| Rooms, kitchen, toilets, internal passages | Yes |
| Internal partition walls within the flat | Yes |
| External walls | No |
| Service shafts | No |
| Exclusive balcony or verandah | No, stated separately |
| Exclusive open terrace | No, stated separately |
| Common areas: lobby, stairs, lift | No |
The Act's explanation describes the exclusive balcony, verandah and terrace areas as those appurtenant to the flat and meant for the allottee's exclusive use.
Carpet area vs built-up area vs super built-up area vs plinth area
Carpet area is usable floor inside the walls. Built-up area adds the walls and often balconies. Super built-up area adds a share of common areas. Plinth area is the IS 3861 covered area of a building at floor level.
| Term | What it adds | Defined by |
|---|---|---|
| Carpet area | Usable floor plus internal partitions | RERA Section 2(k) |
| Built-up area | External walls, often balconies | The agreement or bylaw |
| Super built-up area | A share of lobbies, stairs and other common areas | The builder's area statement |
| Plinth area | Covered area at floor level, walls included | IS 3861:2002 |
No fixed percentage converts one into another; it depends on wall thickness, balconies and how much common area a project has. Ask for the area statement instead of applying a ratio.
Why can the carpet area on paper differ from what you measure?
Usually because a different definition was used: an older agreement, a local bylaw or IS 3861, which has its own carpet area rules. Check which definition the document states before comparing numbers.
Sale documents from before RERA often quoted super built-up area, and some local bylaws define carpet area for floor-space calculations in their own way. IS 3861, the BIS standard for measuring areas, also has a carpet area definition that is not the RERA one. When a measured figure and a document disagree, first agree which definition applies, then measure each room wall to wall.
Should construction cost be worked out on carpet area?
No. Contractors and cost calculators quote per sq ft of built-up area, which includes the walls. Applying a built-up rate to carpet area understates the budget.
For your own house, give each floor's built-up area to the house construction cost calculator. For a flat purchase, compare prices on carpet area, which is the figure RERA fixes. Mixing the two is the most common reason two estimates of "the same house" disagree.
Go deeper
Related terms
Sources
- Real Estate (Regulation and Development) Act, 2016, Section 2(k)
- IS 3861:2002, method of measurement of plinth, carpet and rentable areas (BIS)
- SiteSetu: project closeout guide (RERA carpet area at handover)
Checked 2026-11-03. Contract documents, tender conditions and the structural drawings for your project take precedence over the general rules on this page.